Maxcom MC6950 Quick Start Manual page 20

Press on handset :
or
or
x 3
x
or
2
Change the handset volume level
There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for each of
the earpiece and speaker volumes.
During a call, press UP / DOWN to select volume 1‐5. The current setting is shown.
When you end the call, the setting will remain at the last selected level.
3
Audio Boost Feature
The audio boost feature allows you to amplify the handset earpiece volume to compensate for
the ear's limited sensitivity.
To turn on the audio boost feature:
During a call, press AMPLIFY at any time. The handset top indicator LED turns on.
When the audio boost feature is activated, press UP / DOWN to increase or decrease the
earpiece volume within the specific frequency range set in Equalizer. (See section "Equalizer"
for more details.)
To turn off the audio boost feature:
Press AMPLIFY again and the handset top indicator LED turns off.
Note: The audio boost feature will be turned off automatically when the call is ended.
Set the Equalizer
The phone has three different frequency range filters (NATURAL, BASS, TREBLE) that you can
set, to adjust the sound in the earpiece to suit your preference.
Enter in the menu and Select
2
Select EQLIZER
Select NATURAL
Press MENU / OK to confirm.
HS SET
or BASS or TREBLE