Restore Factory Settings; Computer Connection; Faq (Troubleshooting) - Maxcom MM920 User Manual

Restore Factory Settings

This option allows you to restore factory settings. Select in
MENU: Settings->Restore Factory Settings, and enter the
security code. Press the Left Function Key to confirm.
Warning: Default security code : 0000

16. Computer Connection

You can connect the phone to a computer using a USB
cable; you can copy and transfer files between the phone
and the computer.
Getting connected:
- plug the USB into the phone
- plug the other end of the USB cable to the USB port in
the computer
- there will be a message on the phone screen: „Mass
Memory Device" and „Port COM". Select: Mass Memory
Device.

17. FAQ (Troubleshooting)

Only qualified service workers are authorized to repair the
phone. Any attempts of unauthorized repair and
modifications void the Manufacturer's warranty!
„Cannot make a
phone call"
Make sure the number you are dialing is
correct. If you make an international phone
call, dial a country code before the actual
number (eg. 0049 or +49 for Germany).
53