Maxcom MC6950 Quick Start Manual page 45

Press on handset :
x7
or
or
x7
or
or
x7
or
or
Care Voice
You can record voice messages. The voice message will be played automatically
through the base speaker when the time reaches.
Play the Care Voice Message
Enter MENU to select CARE VOICE.
Press MENU/OK and UP/DOWN to select C VOICE 1 or C VOICE 2.
Press MENU/OK and UP/DOWN to select PLAYBACK.
Press MENU/OK to play the desired voice message.
Note: If no message recorded before, display will show "EMPTY".
Record a Care Voice Message
Enter MENU to select CARE VOICE.
Press MENU/OK and UP/DOWN to select C VOICE 1 or C VOICE 2.
Press MENU/OK and UP/DOWN to select RECORD.
Press MENU/OK and speak to the phone after a beep to record the message.
Note: If there is already a message recorded before, display will show "REPLACE".
Press MENU/OK to record the new message.
Press MENU/OK to save, and the recorded message will be played automatically.
OR
Press BACK/CLEAR to cancel, then the current message will not be recorded and the
previous message will be removed as well.
Turn the Care Voice Message ON / OFF
Enter MENU to select CARE VOICE.
Press MENU/OK and UP/DOWN to select C VOICE 1 or C VOICE 2.
Press MENU/OK and UP/DOWN to select ON/OFF.
Press MENU/OK and UP/DOWN to select DAILY, ONCE or OFF.
Press MENU/OK to confirm.
If you selected DAILY or ONCE, enter the time in 24 HR format to set the alert time.
Note: If you selected OFF, and if there is a message preset by user, the date/ time setting
will be removed, but the recorded message will be kept. You can turn it on for next use.
Press MENU/OK to confirm.
Note: You can also activate the Care Voice even if you have not recorded any message for
it before. In this case, base will play the heading music without voice announcement when
the set time arrives.