Lcd Description - Maxcom MC6950 Quick Start Manual

LCD display description
11
12
13
14
15
16
17
18
19
20
21a
21b
21c
21d
21e
22
Indicates when there are more characters or numbers in front of those being displayed.
Steady on when the handset is within range of the base.
Flashes when the handset is in marginal range of the base.
Off when out of range or cannot communicate with the base.
On when you have a new Voice Mail message. (This is a caller display service and is not
usually available from UK network providers.)
Steady on when a call is in progress.
Flashes during an intercom ringing.
Steady on when an intercom call is in progress. Flashes during intercom ringing.
Flashes when the alarm time has been reached.
On when the keypad is locked.
On when the speakerphone is turned on.
On when the handset ringer is switched off.
Steady on when an alarm is set.
On when a new call is viewed in the Call Log.
On when the keypad is locked.
Full battery power level.
2/3 battery power level.
1/3 battery power level.
Flashes when low battery power level is detected, needs charging.
Cycle when battery is charging.
Indicates when there are more characters or numbers after those being displayed.