Configuring a wired LAN
You can connect the camcorder to a
network using a wired LAN.
Internet
1
Connect the wired LAN jack of the
camcorder to a router using a
LAN cable (sold separately).
2
Press the MENU button.
3
Select
(NETWORK SET) t
[WIRED LAN SET] t [IP
ADDRESS SET] with the SEL/SET
dial.
Router
4
Configure the access point
settings.
IP address
Select the IP address configuration
method.
When [Manual] is selected, enter the IP
address configuration items displayed
on the screen, and select [OK].
z Tip
• Selecting [DNS server setting] on the IP
ADDRESS SET screen will display the DNS
server setting screen.
Using the streaming function
(STREAMING)
You can connect the camcorder to a
network and stream a movie in real-time to
external devices.
Streaming formats
There are limitations on the size of the
original file movie and the streaming movie.
For details, see "Streaming supported
formats" (p. 156).
Configuring streaming (preset
registration)
You configure streaming settings and
register them using PRESET beforehand to
distribute a stream using those settings.
The following items can be configured.
SIZE
Select the image size for streaming.
– 1280×720
– 640×360
z Tip
• Select a size of "640×360" for increased
streaming distribution stability.
75
Continued ,