Sony PXW-FS5 Operating Manual page 83

BLACK LEVEL
To set the black level.
Item
GAMMA
To select a gamma curve.
Item
[STANDARD]
[STILL]
[CINE1]
[CINE2]
[CINE3]
[CINE4]
[ITU709]
[ITU709(800%)]
[S-LOG2]
[S-LOG3]
BLACK GAMMA
To correct gamma in low intensity area.
Item
[RANGE]
[LEVEL]
Description and settings
Sets the black level.
–15 to +15
Description and settings
Standard gamma curve for movies
Gamma curve like an interchangeable-lens still camera movie.
Makes soft color images by decreasing dark area contrast and
sharpening bright area tone changes (HG4609G33 equivalent).
Almost the same effect as [CINE1]; select this if you want to treat the
image in a range within 100% of video signal when editing, etc.
(HG4600G30 equivalent).
Increases contrast between bright areas and dark areas more than
[CINE1] and [CINE2], sharpening dark area tone changes.
Increases dark area contrast more than that of [CINE3]. The dark area
contrast is weaker and the bright area contrast is stronger than that of
[STANDARD].
Gamma curve that corresponds to ITU-709. Gain in low intensity area:
4.5
Gamma curve for checking scenes when shooting using [S-LOG2] or
[S-LOG3].
[S-LOG2] gamma curve. This setting presumes editing in post-
production after recording.
[S-LOG3] gamma curve. Gamma curve with characteristics similar to
film, and which presumes editing in post-production after recording.
Description and settings
Selects a correcting range.
HIGH / MIDDLE / LOW
Sets the correcting level.
–7 (maximum black compression) to +7 (maximum black stretch)
83
Continued ,