(Display Set) Menu; Display Settings (Marker/Display Output, Etc.) - Sony PXW-FS5 Operating Manual

(DISPLAY SET)
menu
Display settings (MARKER/DISPLAY
OUTPUT, etc.)
The default settings are marked with B.
See page 113 for details on selecting
menu items.
Press the MENU button t select
(DISPLAY SET) with the SEL/SET dial.
HISTOGRAM
The histogram displays the luminance
distribution that shows how many pixels of
a particular brightness exist in the image.
B OFF
Does not display the histogram.
ON
Displays a histogram.
A line appears at the 100% position, and
the color of the zone above the line
changes.
ON[ZEBRA POINT]
The histogram shows the point where the
zebra pattern appears. A line is displayed
at the brightness level set with [ZEBRA].
z Note
• Cannot be displayed when Super Slow Motion
mode is set.
z Tip
• You can assign this function to an ASSIGN
button (p. 63).
Histogram
ZEBRA
You can display a zebra pattern as a guide
for adjusting brightness.
x ON/OFF
B OFF
Does not display the zebra pattern.
ON ( and level)
LEVEL
x
You can select the brightness level.
B70 to 100, or 100+
b Note
• Zebra is not recorded onto the memory card.
z Tips
• The zebra pattern is a stripe pattern that appears
in areas of brightness equal to or exceeding the
brightness level you have set.
• You can assign [ON/OFF] to an ASSIGN button
(p. 63).
PEAKING
x ON/OFF
B OFF
Does not display the peaking.
ON ( )
You can display an image on the LCD
screen with its outlines enhanced.
This function helps you to adjust the focus.
COLOR
x
You can select peaking color.
BWHITE, RED, YELLOW
x LEVEL
You can select the peaking sensitivity.
HIGH, BMIDDLE, LOW
b Note
• The enhanced outlines will not be recorded on
the memory card.
131
Continued ,