Using network functions (continued)
1
Write the root certificate to a
memory card.
Write the certificate in PEM format with
a "certification.pem" file name to the
root directory of the memory card.
2
Insert the memory card with the
root certificate into memory card
slot A of the camcorder.
3
Press the MENU button.
4
Select
[ROOT CERTIFICATE] t [OK]
with the SEL/SET dial.
• The root certificate starts importing.
• The certificate is imported
successfully when "Completed."
appears. Select
screen.
b Notes
• Do not eject the memory card while a certificate
is being imported.
• Resetting network settings (p. 80) will delete the
root certificate imported from the memory card,
and will initialize the root certificate of the
camcorder.
Note on wireless network function
We assume no responsibility whatsoever
for any damage caused by unauthorized
access to, or unauthorized use of,
destinations loaded on the camcorder,
resulting from loss or theft.
80
(NETWORK SET) t
to dismiss the
Security in the use of wireless LAN
devices
• To avoid hacking, access by malicious
third parties, and other vulnerabilities,
confirm that the wireless LAN is always
secure.
• It is very important to set up security on a
wireless LAN.
• If a problem occurs due to inadequate
security measures or due to foreseeable
circumstances, Sony Corporation is not
responsible for any resulting damage.
Resetting network settings
The following settings are reset when
resetting network settings.
• SSID/password for smartphone operation
• Streaming settings (p. 75)
• FTP transfer settings (p. 77)
• FTP transfer result (p. 79)
• Wired LAN settings (p. 75)
• Access point settings (p. 70 to 73)
• Device name (p. 73)
1
Press the MENU button.
2
Select
(NETWORK SET) t
[NETWORK RESET] t [OK] with
the SEL/SET dial.