Wireless Lan; Wired Lan; Connected Via Smartphone - Sony PXW-Z280 V5.0 Setup Manual

3.1.2. Wireless LAN

Check the wireless LAN router's settings before configuring the camcorder's network settings.
The following information is required.
• SSID and password
• Whether the IP address is set by DHCP or manually
• Whether DNS is set automatically or manually

3.1.3. Wired LAN

Check Wired LAN settings before configuring the camcorder's network settings.
The following information is required.
• Whether the IP address is set by DHCP or manually
• Whether DNS is set automatically or manually

3.1.4. Connected via Smartphone

Connect a smartphone to the camcorder using a USB cable, and connect to the Internet via the
smartphone.
Connect the USB cable to the USB 2.0 type A connector or USB 3.0 type A connector as described in the
"3.1.1. 4G/LTE USB Modem"
section. Do not connect the smartphone to the camcorder using a USB hub.
Refer to the Operating Instructions for details.
Use the C3 Portal App (hereinafter referred to as the "C3P App") on the smartphone to configure the
connection to the C3 Portal cloud service.
14