Sony PXW-FS5 Operating Manual page 25

b Note
• Make sure to securely tighten both handle
mounting screws before use. The handle may
uncouple, causing the camcorder to fall, if the
unit is used without securely tightening the
screws.
Removing the handle
Remove the handle using the reverse
procedure for attaching.
b Note
• When using the camcorder with the handle
removed, attach the protective cap to the
connector terminal to protect the connector.
Attaching the accessory shoe
1
Lift the edge of the accessory
shoe plate and pull it in the
direction opposite to that of the
arrow on the accessory shoe
plate and remove it from the
accessory shoe.
Shoe plate
Accessory shoe
2
Place the accessory shoe with its
protrusions matching the
recesses on the accessory shoe
mount, then fix it to the mount
with the four screws.
25
Continued ,