Wired Lan Settings - Sony PXW-X70 Firmware Update

3
Select [Manual setting] t
[Manual regist.].
Notes
• If the camcorder has 10 registered access points,
the message saying that no more access points
can be registered appears. Select [Delete], then
select unnecessary access points on the
displayed screen to delete them.
4
Input the SSID on the displayed
screen, then select [Next].
5
Select the security method.
When you select [WEP] or [WPA],
input your password on the displayed
screen, then select [Next].
6
Set the details of the access point.
IP address
Select the setting method of the IP
address.
If you select [Manual], input the setting
items for the IP address on the
displayed screen, then select [OK].
Priority Connection
Select whether the access point is
prioritized.
Tips
• If you select [DNS server setting] on the IP
address setting screen, the DNS server setting
screen appears.
7
Select [Register].
• Connection to the access point starts.
• When [Registered.] is displayed, the
registration of the access point is
complete. The SSID of the registered
access point is also displayed.
8
t
Select
MENU button to close the menu
screen.
GB
8
, then press the

Wired LAN settings

You can connect the camcorder to the
network via wired LAN.
VMC-UAM2
(sold separately)
USB-RJ45 adaptor
(supplied with the
optional network
adaptor kit CBK-NA1)
Router
Internet
Notes
• When you attach or remove the VMC-UAM2 or
USB-RJ45 adaptor, turn off the camcorder.
1
Attach the VMC-UAM2 (sold
separately) to the Multi/Micro
USB jack of the camcorder.
2
Attach the USB-RJ45 adaptor to
the VMC-UAM2 and connect with
a LAN cable.
3
Press the MENU button.