Streaming Distribution - Sony PXW-FS5 Operating Manual

Using network functions (continued)
DESTINATION SET
Configure the streaming distribution
destination.
– Host Name: IP address or host name of the
receiver
– Port: Port number used for streaming on the
receiver
1
Press the MENU button.
2
Select
[STREAMING] t desired
PRESET number t configuration
item with the SEL/SET dial.
3
Select/set the setting value.
4
Press the MENU button to return
to the shooting screen.

Streaming distribution

You can distribute a stream of the movie
being shot using the connected network.
1
Check that the network
connection settings are
successful (p. 70).
2
Press the MENU button.
76
(NETWORK SET) t
3
Select (NETWORK SET) t
[STREAMING] t [EXECUTE] t
network connection method.
• The network connection starts.
• To cancel streaming, press the MENU
button or press the ASSIGN button
assigned with the [STREAMING]
function and select
• When connection is successful,
appears on the screen and the
camcorder is ready to start streaming.
4
Press the THUMBNAIL button to
start streaming distribution.
• The screen icon changes to
z Tips
• You can assign [STREAMING] to an ASSIGN
button (p. 63). Pressing the ASSIGN button
with the assigned function displays the network
connection setup screen.
• You can assign [STREAM OPERATION] to an
ASSIGN button. Pressing the ASSIGN button
with the assigned function starts streaming
distribution (p. 63).
• To simultaneously record XAVC or AVCHD
movies to memory card and distribute a stream,
start recording after the camcorder is in
streaming standby state.
• If an error occurs during streaming distribution
standby or during streaming distribution, a
message appears. If [RECONNECT] appears,
selecting it will attempt to reconnect the
camcorder. Selecting [END] will disconnect the
camcorder. Repeat the procedure from step 1 to
reconnect.
.
.