SC&T VW02T Instruction Manual

ITEM NO.: VW02
The VGA Extender allows VGA video signals to be transmitted up to 135 meters via 4-paris CAT5 STP
or UTP cable. Used in pairs, the VGA Extender is used in home or commercial applications as a smart,
fast and cost-effective, eliminates costly and bulky VGA cable, allowing VGA monitors to be connected
extended distances from the PC via standard twisted pair cable. Ideal for classrooms video
distribution, lecture halls, retail kiosks, video information displays, overhead projector systems,
PC-training systems, and tradeshows PC demo systems. Wall mountable type could be using CAT5
structuring cable for easy installation to simplifies and beautifies any audiovisual environment.
VW02 Wall Plate VGA CAT5 Extender

Used in pairs via one CAT5 UTP cable to send VGA up to 100 meters.

VGA connector to shielding RJ45 female.

Wall plate outer dimension: 86 x 86 mm

Passive device, no power required, not support VGA DDC protocol.

Supports up to 1280x1024 pixels.

Up to 135 meters via standard 4 pairs CAT5 STP or UTP cable instead of VGA cable.

Transmitter built in virtual DDC to avoid improperly setting at resolution and frequency.

Transmitter built in sync mode selection for signal stability.

Receiver built in sync filter level adjustment for signal stability.

Perfect for classrooms, lecture halls, tradeshows, video information displays...etc.

Panel View:

VW02T
Installation View:
Wall Plate VGA CAT5 Extender
VW02R
VW02T
100M (Max)
VW02R
1