Checking Charge Level Of Internal Battery; Charging The Internal Battery - Invacare XPO100 User Manual

5.5 Checking Charge Level of Internal Battery

Make sure to check the internal battery is fully charged
after charging the batteries and prior to using the XPO
concentrator for the first time and prior to any subsequent
use.
The four battery gauge LEDs A light up when the internal battery
is fully charged.
1. Turn On the XPO concentrator by pressing and holding the
2
On/Off button.
2. Press and hold the battery status button located on the keypad.
1148112-F~12

5.6 Charging the Internal Battery

2
1. To charge the internal battery, do one of the following:
•
Connect the AC power adapter A (if charging from a wall
outlet) to the input power connector located on the side of
the XPO
power adapter into the power source.
• Connect the DC power adapter C (if charging from a
vehicle) to the input power connector located on the side
of the XPO
the power adapter D into the power source.
concentrator and then plug the other end of the
2
concentrator and then plug the other end of
2
Usage
25