Instruction book
Reference
1
2a
2c
3
4
5
6
7
8
9
10
4.3
Installation instructions
Procedure
2920 1818 00
Installation proposal, by-pass pipe and valve
Description
The dryer should be installed on a level floor suitable for taking its weight.
A general-purpose filter which traps solid particles down to 1 micron with a max. oil carry-
3
over of 0.1 mg/m
(0.1 ppm) can be installed.
A high-efficiency filter, may be installed downstream of the refrigerant dryer. This filter traps
particles down to 0.01 micron with a max. oil carry-over of 0.01 mg/m
Air receiver with condensate drain.
Pressure gauge
Condensate drain
Dryer outlet valve
By-pass system
By-pass valve
Dryer inlet valve
Electronic water drain (EWD)
The dryers are designed for indoor use only.
3
(0.01 ppm).
81