Quincy Compressor QED 650 Instruction And Maintenance Manual page 51

Text on figure
(1)
(2)
(3)
• The screen shows the list of all settings.
• Press the Enter button (2); a selection bar is covering the first item (Automatic restart).
Use the ↓ key of the Scroll keys to select the setting to be modified and press the Enter key.
• A pop-up screen appears. Use the ↑ or ↓ key to select the required parameter and press the Enter key to
confirm.
Access key
Different security levels are programmed in the controller (e.g. user, service technician, etc). This menu
item is used to change the security level. Scroll to the correct icon using the scroll key. Press the enter
button. Press the enter button again to modify the security level. Press the enter button again; a pop-up
menu appears. Use the scroll keys to enter the password of the new security level. Press the enter key to
confirm the change.
User password
If the password option is activated, it is impossible for not authorized persons to modify any setting.
• Using the Scroll keys, move the cursor to the Password icon.
• Press the Enter key.
• Select the Modify button using the Scroll keys and press the Enter key. Next, modify the password as
required.
Main chart settings
The main chart settings menu allows to adjust the scale and lines on the graph. To modify these settings,
proceed as follows:
• Select the Main chart settings icon as described above and press the Enter button (1). Following screen
appears:
50
Automatic restart
Maximum power down time
Restart delay
Instruction book
2920 1818 00