Quincy Compressor QED 650 Instruction And Maintenance Manual page 36

Instruction book
4. Chart (Medium resolution)
5. Chart (Low resolution)
Two and four value views
Text on figures
(1)
(2)
(3)
(4)
• Section A shows information regarding the dryer operation (e.g. the Dryer PDP (1), the Relative Humidity
(2)).
• Section B shows Status icons. Following icon types are shown in this field:
• Fixed icons
These icons are always shown in the main screen and cannot be selected by the cursor (e.g. Dryer
stopped or running, Dryer status).
• Optional icons
These icons are only shown if their corresponding function is activated (e.g. week timer, automatic
restart after voltage failure , etc.)
• Pop up icons
These icons pop up if an abnormal condition occurs (warnings, shutdowns, service,...)
To call up more information about the icons shown, select the icon using the scroll keys and press the
enter key.
• Section C is called the Status bar
This bar shows the text that corresponds to the selected icon.
• Section D shows the Action buttons. These buttons are used:
• to call-up or program settings
• to reset a service message
• to have access to all data collected by the controller
The function of the buttons depends on the displayed menu. The most common functions are:
2920 1818 00
Typical Main screen (Two value lines)
Dryer PDP
Relative humidity
Starting
Menu
35