Stopping - Quincy Compressor QED 650 Instruction And Maintenance Manual

Instruction book
Regularly check:
• The pressure dew-point on the display of the control panel. The pressure dew-point will deviate from
nominal if the air inlet conditions or volume flow differ from nominal.
• That condensate is discharged. The amount depends on the operating conditions.
5.5

Stopping

Procedure for controller as shown
Procedure
Step
1
2
2920 1818 00
Action
Close dryer inlet and outlet valves (customer's installation).
Press stop button (13). The dryer stops. Voltage on LED (8) remains lit. Leave the voltage
on if the dryer has to remain on stand-by.
87