Download  Print this page

Miele PW 5065 Operating Manual Page 60

Miele washer operating manual pw 5065.
Hide thumbs

Advertisement

Table of Contents
Menu Settings - Supervisor level
Language J
The display contents can be shown
in different languages.
The fixed language selection can be
set in the sub-menu "Languages J".
^ Select the desired language and
confirm with OK.
Supervisor level
The access code for the operator
level can be changed.
^ Enter the old code.
^ Enter the new code.
Once the new code is confirmed, the
beginning of the "Settings" menu will
appear.
Auto load control
If the Auto load control is turned off
the program will run as if for a full
load.
The machine comes factory set with
this option "on".
60
Pre-wash water
The water type (hot/cold) for the
pre-wash can be selected (except
for the program "Curtains"). The hot
water intake will be only accessible
at a wash temperature of 86°F
(30°C) or higher.
The machine comes factory set with
water type "hot".
Main wash water
The water type for the main wash
can be selected (except for the
programs "WOOLLENS" and
"Curtains"). The hot water intake will
only be accessible at a wash
temperature of 86°F (30°C) or
higher.
The machine comes factory set with the
water type "hot" selected.
If the washer is not connected to hot
water, the program running times will
be extended and vary from the
displayed remaining times.

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments:
  • Nick Taylor Jul 27, 2013 08:57:
    I have a PW 5065 that is showing the message "Powe​r Failure. Program stopped&qu​ot; on the LED screen. If you "OK&q​uot; it a new message comes up "cann​ot change the program&qu​ot; and I can't get rid of this issue, and it seems the manual doesn't cover this problem?