Miele PW 5065 Operating Manual page 58

Settings J
Standby
The display goes out after 10
minutes and the "Start" button
flashes slowly to save energy.
Two options can be selected:
On
The display will go into standby mode:
– if no program is selected after the
machine is turned on.
– after a program has started.
– at the end of a program.
Not in current prog.
(factory default)
The Standby function will be turned on
if no program was selected after the
machine was turned on.
By turning the program selector or
pressing any button the display is
turned on again.
58
Memory
The Memory function remembers the
addition of an extra feature to a
program, a change in spin speed or
the temperature the next time that
program is selected.
Once the wash program is selected
again the washer shows the saved
options.
The Memory function is factory set to
"off".