Download  Print this page

The Display Shows A Fault Message - Miele PW 5065 Operating Manual

Miele washer operating manual pw 5065.
Hide thumbs

Advertisement

Table of Contents

The display shows a fault message

Display message
Drainage fault
q
Water intake
p
fault
ä
Drainage lighting
fault
,
Technical
fault
* To cancel an error message, press OK.
Frequently asked questions
Possible cause
– The drain is blocked.
– The drain hose is too
high.
The water intake/inlet is
blocked.
The drum light is not
locked in position.
There is a fault.
Solution*
– Clean the drain filter and
the drain pump.
– The maximum drain
pump height is 3 ft (1 m).
Possible fault
– the water valve is
closed.
– the inlet hose is kinked.
– the filters are blocked.
Check that the drum light is
correctly fitted.
Start the program again.
If the fault message
appears again call Miele's
Technical Service
Department.
31

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments:
  • Nick Taylor Jul 27, 2013 08:57:
    I have a PW 5065 that is showing the message "Powe​r Failure. Program stopped&qu​ot; on the LED screen. If you "OK&q​uot; it a new message comes up "cann​ot change the program&qu​ot; and I can't get rid of this issue, and it seems the manual doesn't cover this problem?