Active Event; How The Control Panel Indicates An Active Fire Control Point; How The Control Panel Indicates An Active Non-Fire Point - Notifier NFS-3030/E Operation Manual

Active Event

Active Event
NFS-3030 Operating P/N 51344:C 11/4/03
Technical Manuals Online! - http://www.tech-man.com

How the Control Panel Indicates an Active Fire Control Point

A point with a Type ID of
FIRE CONTROL
normal operating automatic functions.
Activation of a
FIRE CONTROL
•Initiates the monitor module Control-by-Event
•Send a message to the panel display, History buffer, installed printer and annunciators
•Does NOT light an indicator at the control panel
•Displays ACTIVE in the upper left corner of the LCD, as well as a
and other information specific to the device

How the Control Panel Indicates an Active Non-fire Point

A point with a Type ID of
NON
- point operation does not affect control panel operation, nor does it display a message at
NON FIRE
the panel LCD. Activation of a
on the control panel. For example, you can program a
lower setting when activated. In this case, when the point activates the control panel activates the
point's CBE to turn the lights down without any audio or visual indication on the control panel.
is used for air handler shutdown, intended to override
point causes the control panel to do the following:
- is used for energy management or other non-fire situations.
FIRE
- point activates CBE—but does not cause any indication
NON FIRE
NON
Operation of the Control Panel
FIRE CONTROL
- point to turn lights in a zone to a
FIRE
Type Code
35