Flavel Pure FPRG**RN2 User Instructions page 8

The ceramic fibre back & imitation gravel used in this product is
manufactured from R.C.F (Refractory Ceramic Fibre). To ensure that the
release of fibres from this item is kept to a minimum, during installation and
servicing we recommend that you use a HEPA filtered vacuum to remove
any dust accumulated in and around the appliance before and after working
on the appliance. When replacing these articles we recommend that the
replaced items are not broken up, but are sealed within heavy duty poly-
thene bags, clearly labelled as "RCF waste". RCF waste is classed as a "sta-
ble", non reactive hazardous waste and may be disposed of at a landfill
licensed to accept such waste Protective clothing is not required when
handling these articles, but we recommend you follow the normal hygiene
rules of not smoking, eating or drinking in the work area, and always wash
your hands before eating or drinking.
CLEANING - WARNING
Before attempting any cleaning operation ensure that the fire has been allowed to
fully cool.
CLEANING THE STAINLESS STEEL AND PAINTED METAL PARTS
The "Pure" fascia that was supplied with this product must only be cleaned with a
clean, damp cloth.
Abrasive cleaners, chemical cleaning agents or any type of polish must
never be used as damage to the finish may result.
CLEANING THE CERAMIC FUEL-BED COMPONENTS
We do not recommend cleaning of the ceramic fuel-bed fibre base or imitation
ceramic gravel as these items are fragile and damage may result.
None of these parts must be washed or exposed to any cleaning agents or
water.
Any damaged parts must be replaced by contacting your dealer or telephoning
BFM Europe Ltd. on the number stated on the rear cover of this book. The
ceramic fibre base must only be replaced with a complete and genuine item and
the fire must never be run with a damaged item in position.
8