REMOVAL & RE-FITTING THE "PURE" FASCIA
a)
The "Pure " fascia is fitted to the product by hooking the top edge of the
fascia over the mounting brackets as shown in Fig. 3 below, then
securing with magnets at the bottom.
Fig. 3
CERAMIC FUEL-BED GRAVEL
a)
The gravel pieces should be randomly placed onto the grooved base of
the product as shown below in Fig. 4. The gravel pieces should be
uniformly distributed in a single layer only. (Do not place on top of one
another)
Fig. 4
7
Hook "Pure"
fascia onto top
mounting brackets