Flavel Pure FPRG**RN2 User Instructions page 3

ABOUT YOUR NEW FLAVEL "PURE" GAS FIRE
The Flavel "Pure" decorative fuel effect gas fire incorporates a unique and highly
developed burner and fuel-bed system. The use of durable ceramic
material in the construction of the fuel-bed ensures long and trouble free
operation.
When first using the new fire a slight smell may be noticed. This is due to starch
used in the manufacture of the ceramic fuel-bed base and imitation gravel pieces,
it is non-toxic and will soon disappear.
Please take the time to fully read these instructions as you will then be able to
obtain the most effective and safe operation of your fire.
IMPORTANT SAFETY INFORMATION
WARNING
This appliance has a naked flame and as with all heating appliances a
fireguard should be used for the protection of children, the elderly and
infirm. Fireguards should conform to B.S. 8423 : 2002.
(Fireguards for use with gas heating appliances).
It is important that this appliance is serviced at least once a year by a CORGI
registered gas installer ( in G.B.) and that during the service the fire is removed
from the fire opening and the flue pipe / chimney visually checked for debris or
blockages which must be removed. During the annual service, replacement of the
Oxypilot and ribbed fuel-bed base panel must be completed. These are conditions
of the manufacturers guarantee. After installation or during servicing a spillage
test must always be carried out.
IF AT ANY POINT DURING USE OF THE APPLIANCE, ANY FLUE
DEBRIS SUCH AS SOOT, MORTAR ETC. IS VISUALLY OBSERVED ON
THE FUEL-BED, THE APPLIANCE MUST NOT BE USED UNTIL IT HAS
BEEN THOROUGHLY CLEANED AND INSPECTED BY A CORGI
REGISTERED ENGINEER.
Rubbish of any type must NEVER be thrown onto the product, this could affect
safe operation and damage the fire.
Only the correct ribbed fibre fuelbed base panel must be used and only complete
and genuine replacement fuelbed base panel can be sourced from BFM Europe
Ltd. Always keep furniture and combustible materials well clear of the fire and
never dry clothing or items either on or near to the fire. Never use aerosols or
flammable cleaning products near to the fire when it is in use.
The trim, fuel-bed and glass panel remains hot for a considerable period
after use and sufficient time should be allowed for the fire to cool before
cleaning etc.
3