Appendix A: Configuration Setting Function - SNBC BTP-R880NP User Manual

APPENDIX A: Configuration setting function

Parameter setting (configuring) by Feed button
1) Hold the FEED button pressed while switching the printer on.
2) After the printer has printed the configuration sheet, press and hold the FEED button to configure the
printer. The main menu for the key-stroke setting procedure is printed.
3) The procedure consists of several sub-menus and step-by-step working is needed.
4) Every choice has a number, which indicates the number of times the FEED button has to be pressed
momentarily. After this, the choice is validated by an additional, but longer press of the FEED button (1
sec).
After all settings have been done, they are stored in the printer by stepping back through the submenus to
the main menu by using the number "1" plus additional press for validation.
- 24 -
BTP-R880NP User's Manual