Chapter 4 Connect The Cable - XYZ Printing da Vinci 1.1 Plus User Manual

Chapter 4 Connect the Cable

● Make sure to set the power switch to the "off " position before inserting the power cord.
● Make sure the power cord is properly connected. Incorrect use may cause damage to the printer.
● Make sure to remove the power cord from printer if you are storing or not using the printer for an extended period of
time.
● Make sure to avoid power strips to power the printer . Use a wall outlet.
Turn on the power
Press the power switch | Power up the printer, until the screen loading screen disappears, you can
begin to manipulate printer.
Press the power button
behind the printer.
P 7
A. LAN Port:
A
Make sure the printer is connected with Internet and
B
plug the cable tightly.
Please use RJ-45 Network cable.
B. USB Port:
C
Make sure USB cable is connected with computer.
C. Power Outlet:
Make sure power cord is properly connected.
Loading, please wait.
Boot completed.
V1.2