Manuel Operation; Operating Day Temperature Thermostat; Operating Night Temperature Thermostat - Bellfires View Bell Medium 3 CF Operating Manual

Bellfi res
OPERATING INSTRUCTIONS

Manuel operation

Here you can turn the burner on and off, and adjust the
height of the fl ames.
• Press (large fl ame) to turn on the burner and to
increase the fl ame height.
• Press (small fl ame) decrease the fl ame height to
turn the burner off.
The pilot light will keep burning. (Stand-by position)
• The appliance will automatically revert to stand-by if
the batteries in the receiver are fully depleted. (The
pilot light will also be turned off.)
This also applies to the Thermostat and Timer operation.
• When one of the buttons on the hand-held transmitter
is pressed (except the SET button), the transmission
symbol
confi rms the transmission with an audio signal.

Operating day temperature thermostat

(The appliance must be in the standby position and the
pilot light is burning.)
Automatic temperature regulation of the pre-set day
temperature. The room temperature is measured and
compared with the pre-set day temperature. The fl ame
height is automatically regulated so as to reach the
pre-set day temperature.
Also see: Setting the desired temperature.

Operating night temperature thermostat

(The appliance must be in the standby position and the
pilot light is burning.)
Automatic temperature regulation of the pre-set night
temperature.
The room temperature is measured and compared with
the pre-set night temperature.
The fl ame height is automatically regulated so as to
reach the pre-set night temperature.
Also see: Setting the desired temperature.
18
appears on the screen. The receiver
Instructions for use