Remote Control; General - Bellfires View Bell Medium 3 CF Operating Manual

REMOTE CONTROL

General

Read these instructions carefully before lighting the fi re !!
The appliance is operated by radio remote control. This comprises a hand-held
transmitter and a receiver. The receiver is part of the gas control block assembly.
The receiver and the gas control block are behind the (white) panel door (operating unit)
next to the appliance. Press the door inwards to open; this will release the catch and the
door will spring out.
The hand-held transmitter and receiver are powered by batteries.
Hand-held transmitter : 1x 9V battery.
Receiver
Note: Hand-held transmitter and receiver are not interchangeable with previous models.
The pilot light is situated in the front of the burner, behind a cowl. Should the pilot light
go out, you must wait fi ve (5) minutes before attempting to re-ignite the fi re.
IMPORTANT:
approx. 10 minutes to allow the chimney to come up to temperature!
Bellfi res
OPERATING INSTRUCTIONS
: 4x 1.5V battery type LR6 or AA.
Option: 6V adapter (120 VAC). Available from your fi tter.
Once the fi re is lit, it must burn at maximum for
13 Instructions for use