Priority Tone Alert; Privacy - Motorola MINITOR VI User Manual

6800969001_EN.book Page 22 Monday, January 13, 2014 11:40 AM

Priority Tone Alert

This feature allows you to override the
vibrate settings of the Function Switch for
Call Address 1 on Frequency 1 to always
sound a tone alert instead.
There are two options available.
•
On: The pager sounds a tone alert
instead of vibrating to indicate an
incoming message — even when the
alert type is set as vibrate.
•
Off: The pager vibrates to indicate an
incoming message — when the alert type
is set as vibrate.
22
English

Privacy

This feature allows you to disable the ability
to monitor the channel when you press and
hold the Reset button — unless Push-To-
Listen is enabled for silent scan or selective
call modes.
There are two options available.
•
On: Pressing and holding the Reset
button does not place the pager in
monitor mode.
•
Off: Pressing and holding the Reset
button places the pager in monitor mode.