Motorola MINITOR VI User Manual page 29

6800969001_EN.book Page 25 Monday, January 13, 2014 11:40 AM
Note: Neither frequency will have
monitoring precedence over the other.
•
When the pager is locked on to either
of the scanned frequencies, the pager
will sound an alert to the correct
address tones for that frequency and
start message storage. The pager will
turn the audio off according to the
current Reset mode. The receiver will
then resume the scan activity.
•
Priority Scan:
•
This mode allows you to monitor traffic
on two different frequencies.
•
One frequency must be
preprogrammed as a priority
frequency; and the second frequency
can be preprogrammed as a non-
priority frequency.
Note: The priority frequency has monitoring
precedence over the non-priority frequency.
•
If the receiver is in the Scan mode and
is monitoring frequency activity on a
non-priority frequency, the receiver will
scan back to the priority frequency at
programmed intervals. If activity is
detected on the priority frequency the
receiver will then lock on to that
frequency. Scanning is stopped until
the priority frequency becomes
inactive.
•
At this time the receiver will resume the
priority scan activity. The pager will
only alert on the detection of alert
tones on the priority frequency. The
pager will then turn the audio off
according to the current Reset mode.
Address detection is turned off for the
non-priority frequency.
•
Silent Scan:
•
This mode allows you to monitor traffic
on two different frequencies.
25
English