6800969001_EN.book Page 28 Monday, January 13, 2014 11:40 AM
must hold down the Reset button to monitor
the incoming message. This option does not
affect the storing voice process.
The Alert Type is set to vibrate by default. It
is compatible with the Off Duty mode (if the
call address is set for either On or Off Duty).
Channel Options
You can program up to five different
receiving frequencies and their
corresponding parameters like bandwidth,
tone system, and coding option.
Channel Bandwidth
The pager can operate on 12.5 KHz
Channel Spacing (Narrowband) or 25 KHz
Channel Spacing (Wideband).
28
English
Reset Function
Sets the method to reset the pager after
receiving a page. There are eight different
reset functions available.
•
Automatic: Resets the pager when
carrier drops.
•
Delayed: Waits momentarily before
checking for carrier drop to reset the
pager.
•
Muted Delayed: Waits momentarily
before checking for carrier drop to reset
the pager. During the momentary wait
period mutes the speaker and stored
voice recording during carrier drop.
•
Revert: Reverts to Monitor mode after
receiving a Selective Call page.
•
Delayed Revert: Waits momentarily
before checking for carrier drop and then
reverts to Monitor mode.