Motorola MINITOR VI User Manual page 31

6800969001_EN.book Page 27 Monday, January 13, 2014 11:40 AM
Announcements
When the Function Switch announcements
are enabled, you can set the type of
announcements to be played. These
announcements are played when the pager
is powered up or when the Function Switch
is moved to a new position.
There are three different announcement
types available.
•
Standard: Announces the mode,
frequency number, and alert type that are
programmed for the current switch
position. For priority scan, the first
frequency announced is the priority
channel.
•
Enhanced: In addition to the Standard
announcement, announces On/Off Duty,
Push-To-Listen, Priority Alert, and
Privacy when programmed for the current
switch position.
•
Custom: Plays the custom function
switch announcements stored. You can
store up to eight different custom
announcements in the pager.
Enable On/Off Duty
This option is available for Selective Call
and Silent Scan modes only. It allows you to
program a specific address as Off Duty,
thereby ignoring that address. By clicking on
the checkbox, the on or off selection gets
enabled in the corresponding channel tab.
Note: While programming the addressed as
on or off for any channel position, at least
one address must be programmed as On
Duty.
Push-To-Listen
This option is available for Selective Call
and Silent Scan modes only. When this
option is enabled, after the page alerts, you
27
English