Setting The Date And Time; Assigning Alert Modes - Motorola PageWriter 2000X User Manual

TIP When moving to another zone, reset your pager back to Full
Service Send/Receive mode until you receive your first page,
then you can put the pager back into Receive Only mode.
This allows you to tell the service provider where to find
your pager. Zones are defined by the paging service provider,
but in general, a major metropolitan area counts as a zone
(e.g., the greater Chicago area is one zone).
To change the message text size:
1. Select from the menu wheel.
2. Press up or down to highlight Message Text,
then press or to toggle between:
[Now NORMAL] ↵ Displays message text in the standard font
size.
[Now LARGE] ↵ Displays message text in a larger font size.
3. Press to access the button field, then select
accept the changes and return to the menu wheel.
To turn on/off the audible keyboard click:
1. Select from the menu wheel.
2. Press up or down to highlight Key Clicks, then press
to toggle between [Now ON] and [Now OFF].
3. Press to access the button field, then select
accept the changes and return to the menu wheel.

Setting the Date and Time

Although your new PageWriter 2000X Two-Way Wireless Commu-
nications Center comes pre-configured, you might need to set the
correct date and time when you first receive your pager. Through
the Set Time application, you can also reset the date and time to
reflect your movement between time zones and for seasonal chang-
es, such as Daylight Savings Time.
To set the date/time:
1. Select from the menu wheel.
24 PageWriter 2000X User's Guide
to
to
2. From the Time field, press up or down in each field to change
the hour, minute, or AM/PM. Press
between Time fields.
3. Press to access the Date field, then press
down to change the numbers for the date. Press
to move between Date fields.
4. Press to access the button field, then select
accept the changes and return to the menu wheel.
To select the date format:
1. Select from the menu wheel.
2. Press up or down to highlight Date Format, then press
to cycle between:
[Now DD/MM/YY] ↵ Displays day/month/year format.
[Now YY/MM/DD] ↵ Displays year/month/day format.
[Now MM/DD/YY] ↵ Displays month/day/year format.
3. Press to access the button field, then select
accept the changes and return to the menu wheel.
To select the time format:
1. Select from the menu wheel.
2. Press up or down to highlight Time Format,
then press to toggle between [Now AM/PM] and [Now 24
hr].
3. Press to access the button field, then select
accept the changes and return to the menu wheel.

Assigning Alert Modes

Four alert modes are available from the Home screen that quickly
and easily override the alerts without changing the settings. They
include Loud, Soft, Vibrate, and Silent. The alert modes allow you
to increase the volume of the alert when you are in a noisy
environment, decrease the volume for normal environments, sub-
stitute vibration when no sound is desired, and turn off the alerts
for environments where any alert is inappropriate.
right or left to move
up or
right or left
to
to
to
System Setup 25