Menu - Lauda DCS2 Operating Instructions Manual

DigiCal DCS 2
Now the thermometer starts operating in measurement mode indicating the actual measurement
value. All instruments display the measurement value of channel 1 on the top display line (large
display line). Underneath the trending bargraph is shown. The second channel of our 2-channel
instruments would be displayed on the bottom line (small display line).

2.4 Menu

The adjustments of the instruments such as like the temperature unit, calibration of probes,
deactivation of channels and others are resulting from the structure of the menu.
You will reach into the main menu by pressing [ENTER/MENUE]. With the up and down keys
[ ] you can choose your required menu item.
Push [ESC] to be back in the measuring mode.
up and down keys [
Menu structure
Press the key
can be started from the opposite direction at
T l h r
for channel 1+2
9 B
9 E
YAME0017/ 09.10.03
]
accordingly to pass through the menu in the displayed direction. Using the key
K h l 1 B @ K
for channel 1+2
T1-T2
m E E
m O !
m O 1
Handling / Introduction
.
c @ B
O p D l
for channel 1+2
m E E
m l
key [ESC]
key [ENTER/MENUE]
B g l i c @ B
for channel 1+2
m E E c @ H a
m l c @ H D
it
9