Table of Contents
Advertisement
2.4.1 Measuring unit switching °C and °F -
= Measuring unit
T l h r
Measuring unit temperature (°C=Celsius, °F=Fahrenheit).
To change the measuring unit press [ENTER/MENUE]. Use the up and down keys [
. Press again [ENTER/MENUE]. Of the left corner of the display appears a small 1, which
T l h r
indicates the selected channel. For changing the channel use the up and down keys [
Press [ENTER/MENUE] to confirm. On the right corner of the display appears
and down keys [
confirm.
Press [ESC] to get back to the measuring mode.
Display
T l h r
1
T l h r
T l h r
2
1
T l h r
1
T l h r
1
T l h r
2.4.2 Temperature Difference–
To display the difference between the two temperature channels push [ENTER/MENUE]. Use the up
and down keys [
display appears a T
Push [ENTER/MENUE] to confirm.
Push [ESC] to be back in the measuring mode.
Both channel have to be activated for showing the difference temperature.
10
] again to adjust the requested measuring unit and press [ENTER/MENUE] to
Keys
ENTER/MENUE
up and down keys [
ENTER/MENUE
°
up and down keys [
B
°
E
ENTER/MENUE
ESC
K h l 1
]to select
K h l 1
–T
. Use the up and down keys [
1
2
Handling / Introduction
T l h r
Function
select the channel 1 or 2
]
]
select the measuring unit
To keep the amended value
To escape without retention
. Push again [ENTER/MENUE]. On the right corner of the
]to adjust the requested selection.
DigiCal DCS 2
] to select
].
°
°
or
. Use the up
B
E
°
[
]
or [
]
B
E
YAME0017/09.10.03
Advertisement
Table of Contents
