Accessories; Ordering Spares - Lauda DCS2 Operating Instructions Manual

DigiCal DCS 2
9.

Accessories

Accessories
Pt 100 sheathed resistance probe with 4-wire connection, class B 1/3 DIN,
-200 ... +450°C. The calibration values of this probe are encoded in the LAUDA
calibration code. Probes with a 3mm diameter tubing made of stainless steel 300mm
long, length of the sensor at the end of the tube < 35mm, plastic handle made of ABS
Factory calibration certificate for the measurement chain with calibration points at 0°
and 150°C
DKD calibration certificate for the measurement chain at 2 selectable calibration
temperatures between –40° and +300°C
PC adapter cable (RS232) with a sub-D-plug for the DCS 2 and a 9-pin sub-D-
coupler for the PC
Windows PC Data-Recording-Software: WinTherm Plus on CD-ROM
Plug In Mains Supply for 90-260VAC, 50-60Hz, including plug adaptors for Euro-plug,
USA, UK, Japan

10. Ordering spares

To avoid questions, delay and delivery of incorrect items, please advise always your instruments type
and serial number stated on the manufacturer's label.
The capital letter of the serial number (first position) shows the year of manufacture, e.g. B = 2003
We always would appreciate dealing with your queries and comments and receiving your suggestions,
experience and criticism.
YAME0017/ 09.10.03
LAUDA DR. R. WOBSER
GMBH & CO.KG
Postfach 1251
97912 Lauda-Königshofen
Tel: 09343/503-0
Fax: 09343/503-222
E-mail info @ lauda.de
Internet http://www.lauda.de
Accessories / Ordering spares
Cat.-no.
ETP 065
LMZ 052
LMZ 053
EKS 037
LSDM2002
EBE 043
23