Data Of Probe-Calibration - Lauda DCS2 Operating Instructions Manual

8.

Data of probe-calibration

Our quality-probes are the main reason for the precision and quality of your measuring. To facilitate the
exchange of a probe without a losing precision, our probes were measured in our company and added
with a code that describes the characteristic line of the probe. The probe is labelled obviously with the
relevant code.
If you change the probe you have to enter the code into the measuring instrument. . We recommend to
write down both values in order to avoid any problems (especially if the probe is positioned at a place
difficult to access, or if there are several external probes in use):
Ref.-no:
Appellation:
Serial number:
Calibration data:
Ref.-no:
Appellation:
Serial number:
Calibration data:
Ref.-no:
Appellation:
Serial number:
Calibration data:
Ref.-no:
Appellation:
Serial number:
Calibration data:
Ref.-no:
Appellation:
Serial number:
Calibration data:
22 Data of probe-calibration
DigiCal DCS 2
YAME0017/09.10.03