3.
Power supply
For the power supply of the instrument a 9VDC source is required:
•
230V; 50/60Hz,
•
90-260V; 50-60Hz,
4.
Error codes
By displaying the following error codes the instrument support the operation of the instrument.
D p p m p
m O D l
r m G h
r m K m
18
Ref. No. EBE 042
Ref. No. EBE 043
Description
no probe or wrong probe is connected
"too high" exceeding of the measuring range
"too low" underflow of the measuring range
Power supply / Error codes
DigiCal DCS 2
YAME0017/09.10.03