I Transmitting Dsc Calls - Icom IC-M502 Instruction Manual

I Transmitting DSC calls

Transmitting individual call
The individual call function allows you to transmit a DSC sig-
nal to a specific party only.
q Select a desired channel other than channel 70.
w Push [DSC/ENT] to select the DSC menu.
e Rotate the channel selector to select "individual" and push
[DSC/ENT].
r Rotate the channel selector to select the desired pre-pro-
grammed individual address; or push [DSC/ENT] while
"Manual set" is displayed, to set the ID code for the indi-
vidual you wish to call.
• The ID code for the individual call can be set in advance. (p. 22)
t Push [DSC/ENT] to transmit the individual call.
• Channel 70 is selected and the individual call is transmitted to
the selected station.
• If channel 70 is busy, the transceiver standbys until the channel
becomes clear.
• Routine category only is available.
y Standby on channel 70 until an acknowledgement is re-
ceived.
u When the acknowledgement is received, the display
changes to the previously selected user channel with
beeps.
i Push and hold [PTT] to communicate your message to the
responding party.
6
DSC OPERATION
17