Connections And Maintenance; I Supplied Accessories; I Antenna; I Fuse Replacement - Icom IC-M502 Instruction Manual

Vhf marine transceiver

Hide thumbs Also See for IC-M502:

Table of Contents

CONNECTIONS AND MAINTENANCE

The following accessories are supplied:

q Mounting bracket ............................................................ 1

w Microphone hanger (OPC-562) ...................................... 1

e Mic hanger screws (3

r Mounting screws (5 × 20) ............................................... 2

t Flat washers (M5) ........................................................... 2

y Spring washers (M5) ...................................................... 2

u Mounting bracket knobs ................................................. 2

i DC power cable (OPC-946) ........................................... 1

× 16) ............................................ 2

Qty.

A key element in the performance of any communication sys-

tem is an antenna. Ask your dealer about antennas and the

best places to mount them.

One fuse is installed in the supplied DC power cable. If a fuse

blows or the transceiver stops functioning, track down the

source of the problem, if possible, and replace the damaged

fuse with a new, rated one.

If the transceiver becomes dusty or dirty, wipe it clean with a

soft, dry cloth.

AVOID the use of solvents such as benzene or al-

cohol, as they may damage transceiver surfaces.

Table of Contents