C Technologies C-Pen 20 User Manual page 19

Use Text to Cursor
Make sure you have selected Text To Cursor mode; the icon in the system tray looks like
this .
Also make sure the window with the document where the scanned text should be pasted is
active.
- Move C-Pen 20 over the text you want to copy to your document. Lift C-Pen 20. The
text appears at the cursor in the document.
Troubleshooting
If you only get unknown characters, the Reading mode is probably wrong (see the Prepare
section above).
Tip
You can set the program to play a sound when the scanning is unsuccessful in the Settings
window (select Scan _ Settings in the menu).
17
EN EN EN