Software Suite; Software And Driver Installation From Cd - Imperx LYNX Series Hardware User Manual

E.1 Software Suite
The LYNX GigE software suite consists of the following files and folders:
Windows XP and 2000 application files:
( located in C:\Program_Files\Imperx\LYNX GigE\Binaries )
LYNX Terminal executable files:
(located in C:\Program_Files\Imperx\LYNX GigE\LYNX Terminal )
Documentation files:
( located in C:\Program_Files\Imperx\LYNX GigE\Documents\ )
SDK files
(.located in: C:\Program_Files\Imperx\LYNX GigE\Includes;
C:\Program_Files\Imperx\LYNX GigE\Libraries;
C:\Program_Files\Imperx\LYNX GigE\Samples
E.2 Software and Driver Installation from CD
Use the following steps to install the LYNX GigE software supplied on a CD:
1. If a version of LYNX GigE was previously installed on this machine, then
you must first remove it:
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.

Software and driver Installation from CD

2.1
Left mouse click on "Start"
Left mouse click on "Settings".
Left mouse click on "Control Panel".
Double left mouse click on "Add or Remove Programs".
Left mouse click "LYNX GigE Software".
Left mouse click on "Remove".
Left mouse click on "Yes".
Left mouse click on "Close".
If the 'LYNX - InstallShield Wizard' pops-up:
- Left mouse click on 'Remove'.
- Click 'Next'.
- Click 'Yes'.
- Click 'Finish'.
For a complete set of instructions on LYNX GigE high performance
driver installation, please refer to the "LYNX GigE Driver Manual"
206 of 216
LYNX Hardware User's Manual