Retrieving Workspace Settings - Imperx LYNX Series Hardware User Manual

A.6 Retrieving workspace settings
Command
Get Bit Depth
Get Dual Mode
Get Lookup Table
Get Lookup Header
Get Noise Correction
Get Image Reversal
Get Negative Image
Get Test Mode
Get Defect Correction
Get Flatfield Correction
Get Flatfield Header
Operating Modes
Syntax Parm#1 String
returned
gbd 8|10|12 Returns the current bit depth.
gdm on|off
glt off|1|2 Returns the current lookup table setting:
glh 1|2 various Returns the header text of the selected
gnc on|off
gir on|off
gni on|off
gtm off|1|2|3 Returns the current test pattern setting:
gdc on|off
gfc on|off
gfh various Returns the header text of the flat field table.
185 of 216
LYNX Hardware User's Manual
Description
Returns the current dual mode setting:
off = single tap mode
on = dual tap mode
off = disabled
1 = user #1
2 = user #2
lookup table.
Returns the current noise correction setting.
Returns the current image reversal setting.
Returns the current negative image setting.
off = disabled
1 = fixed horizontal pattern
2 = fixed vertical pattern
3 = moving vertical pattern
Returns the current defective pixel
correction setting.
Returns the current flat field correction
setting.