Table of Contents
Advertisement
Cheetah Pregius Camera with Camera Link – User Manual
3 Configuration Software
3.1 Overview
The Cheetah Pregius CamConfig software ships with the C2020, C2420, C2420Z, C4020,
and C4120 cameras. After installing the software, you can program the camera, change its
settings, and save the settings in a file or in the camera using the Camera Link interface.
The software provides a help file to assist in setting up the camera.
The CamConfig software is compatible with the following operating systems:
•
Windows 7, 32-bit and 64-bit
•
Windows 8 and 8.1, 32-bit and 64-bit
•
Windows 10, 32-bit and 64-bit
3.2 Installing the Software
Use the installation wizard to install the Cheetah Pregius CamConfig software supplied
with your camera.
If a previous version of the GUI software is installed on your computer, you must remove
it before completing the installation. The installation wizard will do this for you during the
installation process. Or, you can uninstall a previous version yourself.
To remove previous versions yourself:
1. Open Control Panel on your computer.
2. Select Programs and Features.
3. Select the software from the list.
4. Click Uninstall.
Installation
1. Locate the executable file (Cheetah_Pregius_1_0_5_xxxx.exe) on the
media that shipped with your camera.
2. Drag the file to your computer desktop. If a Security screen appears, click OK.
July 6, 2018
Page
22 of 64
Rev 1.1
Advertisement
Table of Contents
