Image Reversal Mode; Set Image Reversal; Get Image Reversal - Imperx LYNX Series Hardware User Manual

3.8.15

Image Reversal mode

3.8.15.1 Set Image Reversal (

The
'sir'
During image reversal the camera will deliver pixels, to the Camera
Link interface, in the reverse order from which they were received by
the CCD sensor resulting in a mirror image being displayed. This mode
is useful if the camera is capturing an image that is being reflected from
a mirror.
Syntax:
Parameter:
Example:
Notes:

3.8.15.2 Get Image Reversal (

The
'gir'
Syntax:
Response:
Example:
LYNX Hardware User's Manual
)
'sir'
command instructs the camera to perform image reversal.
sir <on|off>
Enables image reversal.
on
Disables image reversal.
off
Enables image reversal.
sir on
This feature can be used in either single or dual tap
modes. It can also be used in conjunction with
horizontal binning or horizontal window.
)
'gir'
command returns the current image reversal setting.
gtm
on|off
User enters command.
gir
Camera responds with current setting.
on
141 of 216