Pc1616/Pc1832/Pc1864 And Pc5700 Fire Module Communications Connections; Sensor Reset For 2-Wire Smoke Detectors; Sensor Reset For 4-Wire Smoke Detectors; Other Pgm Connections - DSC PC1832 Reference Manual

B.4 PC1616/PC1832/PC1864 and PC5700 Fire Module Communications Connections
For ULC Listed Fire Monitord Installations
CAN
12V 7Ah 12V 4.0Ah/7Ah
B.5 Sensor Reset for 2-Wire Smoke Detectors
AUX Connection
2-WIRE SMOKE DETECTORS
+
AUX + BELL - RED BLK YEL GRN 1 PGM 2
(-)
Ω
2200
END-OF-LINE
RESISTOR
EOLR-3
(+)
Refer to the 2-wire smoke detector compatibility chart in this manual
NOTE: Do not combine the 2-wire smoke detector and 4-wire
smoke detector on PGM2 (only 2-wire smoke detectors on
PGM2).
B.6 Sensor Reset for 4-wire Smoke Detectors
AUX Connection
4-WIRE SMOKE DETECTORS
Smoke Detector must be latching type (such as
DSC MN240 Series).
To reset smoke detectors, enter [ ] [7] [2].
1 PGM 2
+ AUX
IN
-
SMOKE
NO
DETECTOR
IN
ALM
POWER
+
12 VDC
OUT
WHT
LATCHING 4-WIRE
SMOKE DETECTOR
FOR EXAMPLE,
DSC MN240 Series.
EOLR-2
END OF LINE RESISTOR
Ω
5600 0.5W
Compatiblity Identifier: PC5-2
Maximum Operating Voltage: 13.75VDC
Ω
Maximum Circuit Resistance: 100 (total)
Do not mix different models on the
same circuit as correct operation
may be impaired.
Zone
RM-1 POWER LOOP
Input
SUPERVISORY RELAY
BLK WHT
COM 12V
DC 35mA MAXIMUM
-
OUT
ALARM
INITIATING
+
LOOP
RESISTANCE:
100Ω
RED GRN
Refer to installation guidelines in
Installation Manual and detector manufacturer's
literature when locating smoke detectors.
To L o c a l
P h o n e s
B.7 Other PGM Connections
PGM1 PGM2 PGM3 PGM4
NOTE: For devices requiring more than 50mA, use a relay (DSC RM-
1) or UL-recognized parts only for this application.
NOTE: The RM-1 relay module cannot be installed outside of the
main panel enclosure.
64
To L o c a l
P h o n e s
PGM1 PGM2 PGM3 PGM4
RED BLK