Burglary Verification; Swinger Shutdown; Call Waiting; Fire Alarm Verification - DSC PowerSeries Neo HS2016-4 User Manual

Chapter 6.0 Access Code Types

6.2 Burglary Verification

The Control Panel includes sequential detection features that require a trip on two or more zones
within a given time period, to generate a confirmed alarm and immediate police response.
Note: Must be enabled and configured by installer.

6.3 Swinger Shutdown

The Control Panel has a swinger shutdown feature that when enabled a programmable number of
trips shall shut down the zone.
Note: Must be enabled and configured by installer.

6.4 Call Waiting

The Control Panel includes a programmable option for call waiting to prevent a call waiting line
from interfering with the alarm verification process. This option is disabled by default.
Note: Must be enabled and configured by installer.

6.5 Fire Alarm Verification

Fire Alarm Verification is an available option for Fire zones. If configured, once the conditions for
alarm verification are met the fire alarm will sound and an alarm transmission will be sent to the
monitoring station.
Note: Must be enabled and configured by installer.

6.6 System Lockout due to Invalid Attempts

If too many invalid access codes are entered, your system can be configured to automatically lock
out inputs from all keypads, wireless and proximity keys, and SMS commands for a specified dur-
ation. When any keys are pressed, an error tone will sound. FMP keys are still active during
Keypad Lockout.
Note: Feature and lockout duration must be configured by installer.

6.7 User Labels (LCD keypads only)

Adding or editing labels is done by using a pre-programmed word library. The following table lib-
rary lists the full library and the associated three digit code.
To Edit a User Label
1. From the applicable user, press [3] or use the scroll keys to
scroll to User Labels and press [*].
2. Press [*] [*] to enter word library.
3. Use the scroll keys to scroll through the list of words or use the
[3-digit number] to display the desired word. Press [*] to
select the word.
4. To enter an additional word, repeat step 3.
- 15 -
LCD Display
Press (*) for <>
User Labels
Program Name
{User 1 Label 1}
Press (*) for
{User Label}