19. Software update with Updater
● The BRC2E52C7/BRC3E52C7 software includes by default language pack 1.
● Other language packages can be installed with the 'PC USB cable' option (EKPCCAB3) + updater
software.
● Prerequisites:
- Updater software: please contact your local dealer for the correct version
- 'PC USB cable' EKPCCAB3 or higher: includes wire harness and cables 4P344073-1- and
4PW64322-1A (both are needed during the installation).
Installation instructions:
1. Make sure that the indoor unit is powered off.
2. Connect the cables.
See the figure below for how to connect the cables.
3. Power on the indoor unit.
4. Start the updater on the PC.
5. Proceed to the "Update Procedure Selection" window. The remote controller software is
automatically detected.
6. Fill in the model name "BRC" in the filter box and select the desired language pack.
7. Follow the onscreen instructions (additionally, during installation, cable 4P344073-1 is
needed).
2
1
4
3
X1A
More information about the available languages can be found in
BRC2E52C7 / BRC3E52C7
–
4P368041-1
2014.02
5
Software update with Updater
1) PC with updater
2) PC USB cable
3) 4PW64322-1A cable
4) Remote controller PCB
5) To indoor unit P1/P2
"12. Language" on page
27.
Installation manual
42