Daikin BRC2E52C7 Installation Manual page 18

Field settings
NOTE
● Though the configuration is performed for the whole group, set the Mode No. in parenthesis
when performing an individual configuration per indoor unit or when checking after the
configuration is finished.
● The SECOND CODE NO. at factory shipment depends on the indoor unit model. Default
values can be found in the respective Service Manual of the respective units.
For the following settings, the value is the same for all indoor units.
- Thermostat sensor used for the "Auto" operation mode and the Setback function (room
temperature on detailed display):"02".
- Setback function: "04"
- External input B1: "02"
- External input B2: "02"
● Functions which are unavailable for the connected indoor unit(s) are not displayed.
Installation manual
17
BRC2E52C7 / BRC3E52C7
–
4P368041-1 2014.02